Expert Answers about Kia Trailer Tool Box

• Can Fifth Wheel Hitch be Used in 2010 GMC Sierra with Tool Box
• You can most likely use the tool box, but I would recommend taking a few measurements to make sure there will not be any clearance issues. You will need to make sure that the height and depth of the tool box will not interfere with the fifth wheel trailer. If the height of the front of the trailer loft clears the top of the tool box by at least 6 inches, you should be just fine. The fifth wheel hitch is installed on the truck so that the king pin sits directly over the center of the...
  view full answer...


• How To Determine If Ranch Hitch Adapter Will Work On Truck Bed With Tool Boxes & Have Clearance
• With having tool boxes in your bed you still need to have 6" of clearance from the top of the tool box to the underside of your 5th wheel camper. Using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3100 you will still need to measure your pin box dimensions to ensure you will not have any issues with the corners of the pin box hitting either a front mounted or side mounted tool box. Remember you will need Safety Chains # AM3109 as they are required on all ball type...
  view full answer...


• Could DeeZee Replacement Premium Toolbox Mounting Kit # DZ97904 Attach Box to Trailer
• As long as there's a lip or ledge for your tool box to attach to the mounting kit part # DZ97904 could work well for attaching your box to the trailer. The other option we see work well is to run bolts through the floor of the box and the trailer to secure it.
  view full answer...


• Will Blue Ox Weight Distribution Systems Interfere with a Trailer Frame Mounted Tool Box
• The Blue Ox SwayPro Weight Distribution System, # BXW0750, has undergone a design change. The chain hanger brackets now have a rotating system that is parallel to the trailer frame and you use a wrench to turn the drum and lift the chains. It is all on the outboard side with the exception of the top bracket that rests on top of the trailer frame. The bracket is less than 1/4 of an inch tall off the top of the trailer frame so the 3 inches of space you have is more than enough space. Since...
  view full answer...


• 5th Wheel and Installation Kit for a 2008 Ford F-350, 8 Foot Bed
• The 22K Fifth Wheel Trailer Hitch, # RP30033, is the correct hitch for your 2008 Ford F-350. To complete installation,you will also need either the custom installation kit, # RP50082-58, or the universal kit, # RP30035. I would recommend using the custom install kit, # RP50082-58, because it will be easier and save you some time. I have included links to the instructions for both kits. The biggest aspect to be concerned about is your vehicles gross combined vehicle weight rating or GCVWR....
  view full answer...


• Compatibility of a Combo Auxiliary Tank and Tool Box for a 2017 Ram 3500 with B&W 5th Wheel
• Before you can decide on a tank/tool box combo for the bed of your 2017 Ram 3500 truck, you will need to measure the distance between the 5th wheel hitch and the front part of the bed. The measurement should be from the front edge of the front pucks to the front edge of the bed. This distance will give you an idea of how much room you will have to install an auxiliary tank and tool box combo. DeeZee has 2 tank and tool box combination that might work for your application. The DeeZee Combo...
  view full answer...


• Will a 20LB Propane Tank Fit Inside The DeeZee Trailer Tongue Tool Box?
• You will want to consider the larger DeeZee Tongue Box # DZ91717 as the DeeZee Specialty Series Trailer Tongue Tool Box # DZ91716 you found is not large enough to transport a 20lb propane tank upright. With a typical 20lb propane tank being around 12" in diameter and 18" tall this is the same height as the box you found. The larger Box # DZ91717 is 22" tall allowing for a tank to fit inside the box.
  view full answer...


• Will Two 20-lb Propane Tanks Fit Inside DeeZee Specialty Series Trailer Tongue Toolbox # DZ91717P
• The Dee Zee Plastic A-Frame Trailer Tool Box, part # DZ91717P, has an exterior height of 17-3/4-inches. Its interior height will be approximately 1-1/2 inches shorter according to my contact at Dee Zee. I measured a standard 20-lb propane tank here at our facility and it measures 18 inches tall, including the circular guard around the valve. This will be too tall to fit within the Dee Zee tool box. We do offer a larger 7.24 cubic foot trailer tool box from Dee Zee, the aluminum # DZ91717....
  view full answer...


• How Much Wall Clearance Does UWS A-Frame Tool Box UWS01065 Require
• There needs to be 2 inches of clearance between the UWS A-Frame tool box part # UWS01065 and the wall it mounts in front of to allow the lid to open fully.
  view full answer...


• Best Tool Box for Ford F-150 6-1/2 Foot Bed with 5th Wheel Hitch
• The best tool box we have for a Ford F-150 with 5th wheel hitch is the UWS Truck Bed Toolbox Slim Line Series part # UWS07042 for silver or part # UWS07043 for black. These tool boxes only require 12" of space between the 5th wheel hitch and truck bed which you should have therefore will be your best option. The full size tool boxes are simply too deep to fit in the space above which is why you need the slim version. Furthermore, the low profile design will ensure you don't have any issues...
  view full answer...


• Utility Trailer Upgrades: Toolbox, LED Taillights, and Spare Tire Holder
• The Dee Zee Specialty tool box # DZ6535P should work as a tongue tool box for your trailer dimensions. The overall dimensions of this tool box are: 35 inches long by 14 inches wide by 13 inches tall. Please check these measurements with your trailer and make sure that the full square portion of the tool box will not interfere with the turning/backing radius of your trailer. This toolbox has a capacity of 3.6 cubic feet. When you relocate the cargo that you are carrying in the tool boxes...
  view full answer...


• Best Quality A-Frame Tool Box for Sure Trac Trailer
• I am happy to help you find a trailer tongue tool box for your Sure Trac trailer Andy. When you say you have 44 inches from the widest point, I believe you are referring to 44 inches up from the widest point of the A-frame towards the tailgate. You would still want to make sure you have a long enough space on the a-frame for a longer tool box as well. If you measure from cross member to cross member horizontally across at the widest point, you will know how long of a tool box you can fit. The...
  view full answer...


• Where is The Best Place To Install An Underbody Tool Box On a Gooseneck Trailer?
• The best place to install the RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box # UB1818-48 on your gooseneck trailer is going to be in front of your axles. This is the best place when you consider the approach and departure angles for the trailer as well as distributing weight across the trailer.
  view full answer...


• Compatibility of the BAKFlip G2 Hard Tonneau Cover # BAK26331 and Tool Box on a 2017 Ford F-350
• It really depends on how much room your tool box takes up in the bed of your 2017 Ford F-350. If it sits near the front (cab-side) of your bed and is about as tall as the sides of your bed then you will need to move it forward because there is a little bit of a hinge rail where the BAKFlip G2 Hard Tonneau Cover # BAK26331 secures to the bed. This piece is about 6-1/2 inches wide. You will also need to check the side-to-side clearance. If your tool box pretty much touches the sides of the...
  view full answer...


• Will the Curt Q20 Work with an in Bed Rail Tool Box on my 2017 Ford F-250 Prep Package
• Yes as long as you have 3" from the back of your tool box to the front edge of your prep package hole the Curt Q20 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package part # C16530-16020 will workout well.
  view full answer...


• Can Tool Box Be Installed In 2014 Ram With A Short Bed With Fifth Wheel Hitch Installed
• You can take a couple measurements to see if you have room in the bed of your Ram 1500 truck for a tool box with a fifth wheel hitch installed. For a fifth wheel hitch bed rails like part # RP30035-386, you would measure 26-5/16 inches from the back edge of your truck bed(tailgate end). That is where the edge of the fifth wheel rail would be. Then measure 28-1/4 inches from that point toward the cab. That is where the front bed rail edge would wind up. This only leaves you about 11 inches...
  view full answer...


• Can a Tool Box be Installed with the TracRac TracONE # TA27000XTB on a 2005 Ford F-150
• Since the TracRac TracONE # TA27000XTB that you referenced (or any ladder rack for that matter) installs on the bed rails of your 2005 Ford F-150 you will not be able to utilize a tool box that sits on the bed rails of your truck. Technically you could put the box on top of the clamps, but that would most likely damage them and/or your box. The only way to get them to fit together is to either move the tool box or the front set of bars on the rack towards the middle of the bed. You could,...
  view full answer...


• Can Kabgard Headache Rack Fit with Truck Bed Tool Box
• The Buyers Products Kabgard Headache Rack # 33785204 that you referenced does normally fit with tool boxes. I attached a picture of a crossover style box installed with the rack. As long as your box does not extend past the top of your bed rails this will work well with it. No additional hardware is needed for applications with tool boxes either. I attached a review video link for this for you to check out as well.
  view full answer...


• Does Buyers Products Ladder Rack Fit 2005 Chevy Silverado 2500 With Tool Boxes
• The answer really depends on how your tool boxes are mounted to your 2005 Chevy Silverado 2500. Since the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 clamps onto your truck's bed rails (see photo), if the main tool box extends out to the rails, and/or if the side mounted tool boxes are up towards the bed rails, then it would not fit. Each of the ladder racks that fit your truck do in fact clamp to the bed rails so you would likely need to remove the tool boxes to get...
  view full answer...


• Will DeeZee Topsider Tool Box DZ70 Fit Ford F-250 Fitted with TracRac Ladder Rack TH37003XT
• The TracRac Pro2 Truck Bed Ladder Rack for Super-Duty Pickups # TH37003XT includes integrated tool box mounts as well as two additional clamps to support the rear end of a tool box. My contact at TracRac confirmed that the Topsider style tool boxes from DeeZee will work fine as long as you choose a suitable size. For example, the 5.3-cubic-foot Aluminum Topsider # DZ70 measures 48-inches long, so you'll just want to measure the available space between the vertical posts on the TracRac...
  view full answer...